DIY Personalized Cufflink

Girls, are you always worrying about what meaningful gift you should give to your boys? Let me give you a suggestion. Maybe the personalized cufflink is a good choice. Personalized cufflink is easy to make and inexpensive. I think you will want to make it.

For personalizing the cufflink, you will need:
- cufflink blanks and glass tile inserts
- Tacky Glue
- scissors
- paint brush

Instructions:
1. Print out the free design download above onto your choice of 8.5″ x 11″ paper.
2. Before gluing, wait patiently for at least an hour to let your inkjet print dry.
3. Place a small dot of glue on the paper and then paint it evenly across the design.Then quickly push your glass tile into the glue. Press it evenly and firmly until you can see the design through the glass tile. Carefully center the tile over the design. Make sure there are not any air bubbles between the glass and the paper.
4. Waiting patiently for at least 4 hours to make sure the glue is absolutely dry.
5. When the glue dries, cut out your tiles! Carefully and closely, cut your tile off the paper. Try to trim it as close as you can, clipping the corners if need be.
6. Cut out each of your darling little tiles carefully .
7.Place the embellished glass tile into the cufflink blank to make sure it fits. If it doesn’t, you will need to trim the paper until it does.
8. Gluing the tile to the cufflink blank. Place a small dot of glue on the inside of the cufflink blank, evenly distribute it with a paint brush and then carefully press your glass tile into the cufflink blank.
9. Finally let these glue dry for at least 4 hours.

This is how the personalized cufflink made. It is not difficult, but need your patience. It may be a surprise when boys receive this custom cufflink. Girls, take actions right now!