SUPPLIES:
- cufflink blanks and glass tile inserts
- Tacky Glue
- scissors
- paint brush
- the FREE design download from the Internet
Instructions:
1. Print out the free design that download from the Internet. Make sure to let inkjet print dry completely before continuing the next step.
2. Glue the glass tile insert on top of the design of your choice. Place a small dot of glue on the paper and then paint it evenly across the design….then quickly push your glass tile into the glue. Press it evenly and firmly until you can see the design through the glass tile. Carefully center the tile over the design. Make sure there aren’t any air bubbles between the glass and the paper, if there are you can usually wiggle the tile around to pop them. If your paper pops up a little from the moisture of the glue, simply hold it down for about a minute and it will continue to dry just fine.
3. Let the glass title absolutely dry for a few hours. Do not move or touch them.
4. After the glue is completely dry, cut out the titles. Carefully and closely, cut your tile off the paper. Try to trim it as close as you can, clipping the corners if need be. If there is any glue that has dried on the sides of the glass tile you can cut or scrape that off as well.
5. Place the embellished glass tile into the cufflink blank to make sure it fits. If it doesn’t, you will need to trim the paper until it does.
6. Glue the tile to the cufflink blank. Place a small dot of glue on the inside of the cufflink blank, evenly distribute it with a paint brush and then carefully press your glass tile into the cufflink blank. If glue squeezes out around your tile, it’s no problem – wipe it off. The glue will dry 100% clear. Let these dry completely.
Now, you have done! Give these custom cufflinks to your favorite men. He will be very happy to receive these personalized gifts.
没有评论:
发表评论