2015年3月6日星期五

simple fashion

simple fashion

Green dress
¥7,220 - modekungen.se

Talitha high heel shoes
¥111,140 - christianlouboutin.com

MICHAEL Michael Kors leather handbag
¥15,390 - bloomingdales.com

Charlotte Russe heart necklace
¥480 - charlotterusse.com

Eugenia Kim headband hair accessory
¥11,930 - liberty.co.uk

Tech accessory
¥2,525 - snapmade.com

Lips makeup
¥120 - muastore.co.uk

Nail polish
¥185 - newlook.com

Making Marble Magnets

Making marble magnets are quite fun, smooshing the glue out to make a perfect little magnified image is very satisfying. Now let's make the personalized magnets together.

Materials:
- silicon glue
- magnets
- clear flat glass marbles
- silicon sealer
- pictures (cut out from the magazines)
- toothpick

2015年3月5日星期四

Making a Custom Photo Candle Holder

It is not difficult to make the custom photo candle holder. The first thing you need to do is to choose a favorite photo that you want to stick to the candle holder. Then follow the following steps.

Supplies:

- your chosen image printed on regular printing paper
- clear tape
- scissors
- a clear glass candle holder or small vase
- measuring tape
- Mod Podge
- foam brush
- any embellishments you like
- newspaper to protect your work surface

Instructions:

1. Measure the circumference and height of your candle holder. You want to make sure your image overlaps a little going around the candle holder, so add about 1/4 inch to the length.
For the height, subtract 1/8 inch from the top and bottom so you don’t have to worry about folding it over the glass (1/8 inch x 2 = 1/4 inch total). So all in all, you will add 1/4 inch to the length and subtract 1/4 inch from the height of your candle holder. This will be the final measurements for the size of your document in your imaging program.

2. Print the image on regular printing paper and cut it out with scissors.

3. Place a small amount of clear tape to one edge to get the image lined up well.

4. Put down some newspaper to protect your surface, if needed. Then unrolling it backwards, start adding some Mod Podge to the back while slowly wrapping it around.

5. Once the backing is glued, cover the front. Place your hand inside to hold it up while brushing a good coat of the Mod Podge over the entire surface. Make sure you get the edges well covered so they don’t curl back.

6. Let it dry and then add any embellishments you like.

That is how you make the personalized candle holder. You will be happy to see your favorite photo lit up as it brings back good memories.

2015年3月4日星期三

DIY Six-Pocket Bag

Today I want to share a diy project with you. That is diy six-pocket bag.

Materials:

- 1/4 yard blue print (straps)
- 2/3 yard blue-and-green print (pockets)
- 2 10-1/4-x-14-1/4-inch rectangles thin, firm batting
- 1 yard green print (lining)

Instructions:

1. Finished bag.
A. 8 x 10 x 4 inches
B. Quantities are for 44/45-inch-wide, 100% cotton fabrics.
C. Measurements include 1/4-inch seam allowances.
D. Sew with right sides together unless otherwise stated.

2. Assemble Straps
A. Fold a blue print 4-x-34-1/2-inch strip in half lengthwise with wrong side inside; press.
B. Open and fold long edges into center; press. Refold in half and press. Topstitch 1/8 inch from outer edges to make a strap.
C. Repeat steps 1 and 2 to make a second strap.

3. Assemble Bag Units
A. Fold one blue-and-green print 14-1/2-x-16-1/2-inch rectangle in half lengthwise with wrong side inside to make an 8-1/4-x-14-1/2-inch pocket rectangle; press. Repeat with remaining blue-and-green print rectangle to make a second pocket rectangle.
B. Referring to Diagram 2, with right sides together, layer a green print 14-1/2-x-20-1/2-inch lining rectangle and a pocket rectangle. Place a 10-1/4-x-14-1/2-inch batting rectangle under the layered pieces; pin all layers together.
C. Referring to Diagram 2, pin ends of a strap to the bottom edge of layered pieces, leaving 4 inches between strap edges.
D. Place a pin on each side of strap 10 1/4 inches from bottom edge. Beginning at bottom edge of layered pieces, topstitch one side of strap up to the pin marking 10 1/4 inches; remove pin, sew across strap, and topstitch back down to bottom edge. Repeat with remaining side of strap to complete one bag unit.
E. Repeat steps 2 through 4 to make a second bag unit.
F. Layer bag units' with right sides together; pin. Pin loose portion of straps in place to prevent catching them in stitching. Join units around all edges, leaving a 5-inch opening at top center for turning (Diagram 3). Press seams open. G. To shape flat bottom for bag, at one corner match bottom seam line to side seam line, creating a flattened triangle (Diagram 4). Measuring 2 inches from point of triangle, draw a 4-inch-long line across triangle. Sew on drawn line. Trim excess fabric. Repeat with remaining bottom corner of bag, and both corners of green print lining.
H. Turn bag right side out through opening and finger-press seams. Slip-stitch lining opening closed. Insert lining into bag.

All done. This is how you make the six-pocket bag. You can take this personalized bag with you when you go out.

2015年3月2日星期一

DIY Canvas Drop Cloth Pillow Case

This painted canvas drop cloth pillow case is so cute and so easy to make.You can paint your own design on the pillow cover to celebrate any holiday or to match any decor. After creating this pillow, you may find yourself totally hooked on canvas drop cloth projects! Just follow the instructions for your own no-sew drop cloth pillow case.

2015年3月1日星期日

DIY Baby Bibs

The baby bibs can prevent your baby's clothes from dirty. And you can make the baby bibs by yourself. I think it should be very meaningful for you to make the baby bib for your baby.