Want to know how to make a glass tile pendant? They're super easy – you can
do this! Here's a brief tutorial.
First gather your supplies – you'll need:
–a glass tile
–a bail (that's the hook that goes on the back)
–paper or fabric design
–diamond glaze and a small paintbrush
–superglue
–a necklace to hang it on
First take your tile, and trace it onto your paper. Then cut it out slightly
inside the lines with an exacto knife or scissors. Hold it up with your tile
on top of it to check the size – you don't want any paper sticking out
behind the edge.
Next squirt your diamond glaze on the back of the tile – about pea size.
Use a small paintbrush to spread it out – enough to coat the back of the
tile but not so much that it's going to ooze.
Then while the diamond glaze is still wet set your paper face-down onto it.
Rub the paper to get a really good seal. That will prevent bubbles being
seen through the glass.
Let dry for 5-10 minutes or longer. Then squirt diamond glaze on the back of
the paper and spread it out with a paintbrush to seal in your paper. Let dry
several hours. Then using superglue, glue your bails to the back.
Finally use the necklace to hang on the glass tile. Now, it becomes the
perfect personalized jewelry that you can
put it on.
2015年3月17日星期二
2015年3月15日星期日
DIY Reversible Apron!
Today a funny diy reversible apron project will be shared to you. It is easy to make. Now
let's get started!
For this project you will need:
- 2 yards of fabric (1 yard of each color)
- Coordinating thread
- Pins
- Scissors
- Sewing Machine
- Iron
Instructions:
1. If you do not have a pattern to work with, you can grab one of your old aprons and drew out a pattern onto a piece of poster board and cut it out.
2. Once my pattern was cut out, fold on piece of fabric in half and pinned your pattern to it. Be sure to align the folded side of the fabric to the long end of the pattern, that way when you cut it out you have a full apron piece. Repeat this process with the second fabric.
3. Using the scraps of fabric, cut out 2 strips of fabric for the neck ties and another 2 pieces for the back ties. Fold each strip of fabric in half so that the printed sides are facing each other and ironed them flat.
4. Finally get to sewing! Start with sewing the straps along the long end and one short end. Once all of the straps are sewn, turn them right side out and iron them flat again.
5. After the straps are ready, Place the two main pieces of fabric together, good side facing in. Then place the straps in between the main fabric and pin everything into place. Also pin the straps into place so they didn't end up getting sewn somewhere they were not suppose to be.
6. Sew around the entire apron with the exception of the bottom hem so that it can be easily turned right side out.
7. Once sewing is completed, turn the apron right side out and than fold the bottom hem in and sew it shut.
Finished! I think you will be pretty proud of your own custom apron!
For this project you will need:
- 2 yards of fabric (1 yard of each color)
- Coordinating thread
- Pins
- Scissors
- Sewing Machine
- Iron
Instructions:
1. If you do not have a pattern to work with, you can grab one of your old aprons and drew out a pattern onto a piece of poster board and cut it out.
2. Once my pattern was cut out, fold on piece of fabric in half and pinned your pattern to it. Be sure to align the folded side of the fabric to the long end of the pattern, that way when you cut it out you have a full apron piece. Repeat this process with the second fabric.
3. Using the scraps of fabric, cut out 2 strips of fabric for the neck ties and another 2 pieces for the back ties. Fold each strip of fabric in half so that the printed sides are facing each other and ironed them flat.
4. Finally get to sewing! Start with sewing the straps along the long end and one short end. Once all of the straps are sewn, turn them right side out and iron them flat again.
5. After the straps are ready, Place the two main pieces of fabric together, good side facing in. Then place the straps in between the main fabric and pin everything into place. Also pin the straps into place so they didn't end up getting sewn somewhere they were not suppose to be.
6. Sew around the entire apron with the exception of the bottom hem so that it can be easily turned right side out.
7. Once sewing is completed, turn the apron right side out and than fold the bottom hem in and sew it shut.
Finished! I think you will be pretty proud of your own custom apron!
2015年3月12日星期四
DIY Handwritten Plates
DIY handwritten plates - a funny diy project. Write down the texts as you like on the plates.
It is interesting! Also, it is a good way to kill your time.
2015年3月11日星期三
DIY Graphic Print Hoodies
Are you still thinking about which hoodie do you like to buy among so many sdorable hoodies? Unfortunately you bank account won't allow you to purchase every one of them. So why don't you make your own graphic print hoodies? These personalized hoodies are quite easy to make and also very cheap.
Custom Unique Dog Tag From Snapmade
Pet identification tags containing your phone number and address can mean a safe return home for a lost pet. Pet professionals across the globe cannot stress the importance of pet ID tags enough. Sometimes, we can see dogs finding their way into the shelter without identification, and no way to find out who they belong to. It's a sad, unnecessary potential problem in a dog's life that can be easily prevented.
2015年3月10日星期二
Simple DIY Project: DIY Candle Holders
Today I would like to share the diy candle holders project with you. Now, here we go:
Materials:
- Whittling block
- white craft paint
- paint brush
- dot stickers and a 7/8″
- drill bit
Instructions:
1. Drill hole. Mark the center of one end of the whittling block. Using the drill bit, make a hole in the wood, about 1″deep.
2. Mask. With the dot stickers, create a pattern where you want the wood to remain showing. Go around the whittling block, overlapping the circles slightly. Press the stickers firmly once in place.
3. Paint. Going over the dots, paint the whittling block. Paint only one end of the whittling block and left the bottom bare. To ensure full coverage, paint 2-3 coats and allow to dry completely.
4. Peel. Once the paint is dry, gently peel off the stickers to reveal your design.
These personalized candle holders you have created are simple and it is perfect for outdoor tables.
Materials:
- Whittling block
- white craft paint
- paint brush
- dot stickers and a 7/8″
- drill bit
Instructions:
1. Drill hole. Mark the center of one end of the whittling block. Using the drill bit, make a hole in the wood, about 1″deep.
2. Mask. With the dot stickers, create a pattern where you want the wood to remain showing. Go around the whittling block, overlapping the circles slightly. Press the stickers firmly once in place.
3. Paint. Going over the dots, paint the whittling block. Paint only one end of the whittling block and left the bottom bare. To ensure full coverage, paint 2-3 coats and allow to dry completely.
4. Peel. Once the paint is dry, gently peel off the stickers to reveal your design.
These personalized candle holders you have created are simple and it is perfect for outdoor tables.
2015年3月8日星期日
Cutest DIY Doormat On the Block
If you want to keep your house clean, then the doormat is always needed. If you have spare time, you can try to make a personalized doormat by yourself. Now let's get started!
Materials:
- Basic doormat
- Spray paint in your choice color
- Marker
- Paper bag
- Scissors
- Tape
- Measuring tape
Instructions:
1. Create a Heart Stencil
Cut your brown paper bag so that it lies flat. Then draw on a half heart. Cut along your line and discard the center.
2. Take Measurements
Take a few simple measurements to make sure your heart stencil falls smack dab in the center of your doormat.Measure the length and width of your mat, and then divide those numbers in half. The center of your heart should fall right in the intersection of those two numbers.
3. Tape Down and Spray Away
Tape down your paper bag. Tap on the outside, and then create pieces of rolled tape to place on the underside of the bag. This helps achieve a more crisp line. Before you start spray painting, it's also a good idea to cover any exposed edges of the doormat with scrap paper. Finally, follow the instructions on your spray paint and go to town.
Wait for the spray paint to dry, remove the paper and place in front of your door. Pretty sweet, isn't it?
Materials:
- Basic doormat
- Spray paint in your choice color
- Marker
- Paper bag
- Scissors
- Tape
- Measuring tape
Instructions:
1. Create a Heart Stencil
Cut your brown paper bag so that it lies flat. Then draw on a half heart. Cut along your line and discard the center.
2. Take Measurements
Take a few simple measurements to make sure your heart stencil falls smack dab in the center of your doormat.Measure the length and width of your mat, and then divide those numbers in half. The center of your heart should fall right in the intersection of those two numbers.
3. Tape Down and Spray Away
Tape down your paper bag. Tap on the outside, and then create pieces of rolled tape to place on the underside of the bag. This helps achieve a more crisp line. Before you start spray painting, it's also a good idea to cover any exposed edges of the doormat with scrap paper. Finally, follow the instructions on your spray paint and go to town.
Wait for the spray paint to dry, remove the paper and place in front of your door. Pretty sweet, isn't it?
订阅:
博文 (Atom)



