DIY Bottle Cap Photo Frames

First, paint the inside of the caps with two coatings of white hobby paint.


Second, measure the inside of the cap to be 2.5 cm (1 inch) in diameter. Then cut the printed photos in circles with the same dimensions. When the color inside the caps have dried, drip a little bit of glue in the middle and glued my photos in place.

Third, turn the caps around and glued magnets to the back. Fourth, an alternative to magnets is to glue thumbtacks to the back if you want to place your photo frames on a bulletin board for example.

That's it! Enjoy this diy project - custom photo frame.